PE Woven Lay Flat Hose
PE woven lay flat hose is a type of flexible hose made from high-quality polyethylene (PE) material. It is designed for various applications such as agricultural irrigation, garden watering, construction site drainage, and more.
LYPLAST WOVEN PE flat pipes are innovative solutions for Mainline and Sub-Mainline piping in farm water irrigation.
PE lay flat hose can replace the traditional PVC lay flat hose. Non-toxic and odorless, lighter weight and more resistant to low temperatures.
PE woven lay flat hose is constructed of jacket and lining. The jacket is made of high-strength synthetic fibre (quality polyester filament, polypropylene fiber) and the lining is made of polyethylene.
The hose is constructed of jacket and lining. The jacket is made of high-strength synthetic fibre (quality polyester filament, polypropylene fiber) and the lining is made of polyethylene to enhance its strength and durability, making it suitable for use in demanding environments.
Advantage of PE woven Layflat Hose
It significantly reduces labor intensity, saving both manpower and resources. Additionally, it effectively prevents the growth of microorganisms and green algae within pipe walls. Remarkably, it weighs only half as much as similar products, making it easier to handle and transport. Notably, the hose is non-toxic and odorless, ensuring its suitability for use with drinking water. Furthermore, it demonstrates exceptional durability, withstanding exposure to sunlight for up to two years without showing signs of aging. In comparison to PVC, PP, plastic-coated, and rubber pipes, it exhibits superior frost resistance, remaining flexible even at temperatures as low as minus 40 degrees, while also boasting significantly improved bending resistance.
PVC Lay Flat Hose
PVC Lay Flat Hose (Heavy Duty 8/10BAR), a robust and reliable solution designed to meet the toughest water transfer challenges. Crafted from premium-grade polyvinyl chloride (PVC) material, this hose is engineered for heavy-duty applications where high-pressure performance is essential. With its innovative design and exceptional durability, our PVC Lay Flat Hose ensures efficient water transfer in even the most demanding environments.
Advantages of PVC Lay Flat Hose
High Pressure Rating: With a heavy-duty pressure rating of 8/10BAR (116/145 psi), our PVC Lay Flat Hose delivers superior performance in high-pressure water transfer tasks, ensuring reliable operation even under extreme conditions.
Rugged Construction: Built to withstand the rigors of heavy-duty use, this hose features a reinforced PVC construction that provides exceptional resistance to abrasion, punctures, and UV degradation, ensuring long-lasting durability and minimal maintenance requirements.
Enhanced Flexibility: Despite its heavy-duty design, our PVC Lay Flat Hose remains flexible and easy to handle, allowing for effortless deployment, retrieval, and storage, even in tight spaces and challenging terrain.
Cost-Effective Solution: Designed to offer exceptional value for money, our PVC Lay Flat Hose provides a cost-effective solution for heavy-duty water transfer needs, delivering reliable performance and durability without compromising on quality.
Versatile Applications: From agricultural irrigation and construction site dewatering to mining operations and municipal firefighting, our PVC Lay Flat Hose is suitable for a wide range of applications, ensuring efficient water transfer across various industries.
Our PVC Lay Flat Hose (Heavy Duty 8/10BAR) is engineered to excel in the most challenging environments. Its flexibility, ruggedness, and cost-effectiveness make it a preferred choice for agricultural irrigation, construction site dewatering, municipal firefighting, and industrial fluid transportation. Invest in our PVC Lay Flat Hose for a dependable solution that ensures efficient water transfer, even under the toughest conditions.
TPU Lay Flat Hose
TPU lay flat hose is suitable for fracturing water supply during shale oil and gas extraction, oil transportation, coal mine emergency drainage, emergency drainage, urban emergency drainage, agricultural water supply and irrigation, industrial wastewater transportation, fire remote water supply and other industries.
Advantage of TPU Lay Flat Hose
1. Anti-UV performance: Observed under a 2x magnifying glass, there are no cracks in the outer rubber layer of the hose.
2. Wear resistance: When using H-22 grinding wheel without additional pressure, the number of grinding wheel revolutions when the reinforcement layer is exposed shall not be less than 250,000 revolutions.
3. Scratch resistance: The number of tool cycles when the hose used for ship-to-ship oil transportation or shore-to-ship oil and water transportation is scratched and leaked is not less than 7,000 times.
4. Antistatic: The oil delivery hose is woven with continuous conductive static wires. The static conductive wire ensures that there is continuity between the two joints of the hose, and its maximum resistance value is not greater than 50/s. When the hose is coiled, folded, and subjected to the internal pressure specified in the specification, the hose is guaranteed to be conductive at all times.
5. Anti-oil pollution: When the hose is used to transport oil materials whose colloid content needs to be controlled, the test fluid after filling with liquid will be clear and translucent, with no impurities such as suspended solids. After the test, the detergent colloid content of the test solution shall not be greater than 6mg/100ml.
6. Hydraulic performance: The test pressure and minimum burst pressure of the hose should comply with regulations. Under the test pressure, the hose should have no leakage, obvious deformation, etc. When blasting the pipe, it should be blasted longitudinally. Under the design working pressure, the change rate of the hose length should not be greater than 2%, and the diameter expansion rate should not be greater than 7%. Viewed along the direction of the water flow, the hose should not twist counterclockwise.
7. Waterproof and contaminant: Meet the safety evaluation standard requirements of GB/T17219
PE Drip Irrigation Hose
LYPLAST PE drip irrigation hose is widely used in drip irrigation of agricultural planting, landscaping, greenhouse vegetables and other crops.
PE drip irrigation hose is a type of hose used in drip irrigation systems, typically made from polyethylene (PE) material. These hoses are designed to deliver water directly to the root zone of plants, providing a controlled and efficient method of irrigation. PE drip irrigation hoses come in various diameters, lengths, and configurations to suit different garden or agricultural setups. They are known for their flexibility, durability, and resistance to clogging. PE drip irrigation hoses are commonly used in gardens, farms, orchards, vineyards, and other agricultural settings to conserve water, improve plant health, and maximize crop yield.
Advantage of PE Drip Irrigation Hose
Precise Water Distribution: The PE Drip Irrigation Hose delivers water directly to the roots of plants, ensuring efficient water usage and minimizing water wastage. This precise water distribution promotes healthy plant growth and maximizes crop yield.
Durability: Constructed from durable polyethylene material, our hose is highly resistant to UV radiation, chemicals, and abrasion, ensuring long-lasting performance in harsh agricultural environments.
Flexibility: Despite its sturdy construction, the PE Drip Irrigation Hose remains flexible and easy to maneuver, allowing for easy installation and customization to fit the specific needs of each crop or field layout.
Water Conservation: By delivering water directly to the root zone, our hose helps conserve water by minimizing evaporation and runoff. This water-saving feature is particularly beneficial in arid regions or areas facing water scarcity.
Ease of Maintenance: Our PE Drip Irrigation Hose requires minimal maintenance, reducing labor and operating costs for farmers. Its simple design and durable construction ensure reliable performance with minimal upkeep.
TPU Fire Hose
A TPU fire hose is a type of fire hose made from thermoplastic polyurethane (TPU) material. These hoses are specifically designed for firefighting and are used to deliver water or other fire suppression agents to extinguish fires.
TPU fire hoses are known for their flexibility, durability, and resistance to abrasion, punctures, and chemicals. They are lightweight, making them easier to handle and maneuver during firefighting operations.
TPU fire hoses also have a high burst pressure and excellent flow characteristics, ensuring efficient water delivery to combat fires effectively. Additionally, they are often resistant to mold and mildew growth, making them suitable for long-term storage and reuse. TPU fire hoses are commonly used by firefighters, emergency responders, industrial facilities, and municipal fire departments to protect lives and property during fire emergencies.
Advantages of TPU Fire Hose
Durability: TPU fire hoses are highly durable, resistant to abrasion, punctures, and chemicals, ensuring longevity even in demanding firefighting environments.
Flexibility: These hoses are flexible and easy to maneuver, allowing firefighters to navigate obstacles and reach areas that may be difficult to access.
Lightweight: TPU fire hoses are lightweight compared to traditional rubber hoses, reducing fatigue for firefighters during deployment and retrieval.
High Burst Pressure: They typically have a high burst pressure, ensuring reliable performance under pressure and maintaining water flow during firefighting operations.
Low Friction Loss: TPU hoses offer low friction loss, maximizing water flow efficiency and minimizing energy consumption during firefighting.
Resistance to Mold and Mildew: They are often resistant to mold and mildew growth, reducing the risk of contamination and ensuring safe storage between uses.
Ease of Maintenance: TPU hoses are easy to clean and maintain, requiring minimal effort to keep them in good condition for prolonged use.